sBitx v3 with RigVibe: the sBitx becomes a new radio
The sBitx v3 is an open shortwave transceiver with a built-in Raspberry Pi and touch…
The sBitx v3 is an open shortwave transceiver with a built-in Raspberry Pi and touch screen. With RigVibe 1.9.0 it becomes a new radio: its own full-screen interface, AI noise reduction, FT8 with transmit, FreeDV with RADE, decoders with maps, Meshtastic, logbook β and a dozen radio designs. You no longer need the sBitx software…
Power’s out, the cell network is overloaded, the internet only works in patches β that’s exactly when amateur radio comes into its own. Many local clubs have emergency communications groups, plans and frequencies. What’s often missing is a tool that brings all those paths together: a HAMNET link here, a Meshtastic network there, plus packet…
Quansheng’s little handhelds β especially the UV-K1 and the UV-K5 V3 with a USB-C port β are sitting in plenty of hams’ drawers: cheap, rugged and amazingly versatile with the free F4HWN firmware. Together with RigVibe, they become a lot more: a complete little digital station on your laptop β with just one single USB-C…
I built myself a program for my radio station: RigVibe. The idea was simple β I no longer wanted to have five different programs open at the same time to control the radio, log QSOs, do FT8, watch the waterfall and keep an eye on the DX cluster on the side. RigVibe brings all of…
AI right in the radio network: local artificial intelligence without cloud lock-in For now the system has alpha status and is not yet reliable. Imagine you’re out and about with no internet, but you have access to your Meshtastic network. And suddenly you have a question: “What will the weather be like tomorrow?”, “Where is…
For about a year now I have been renovating my house from the ground up. Usually this blog is mostly about amateur radio, but today I would like to introduce another big project: the installation of my new heating system. Why a heat pump? With energy costs rising, it quickly became clear to me that…
On 23 August 2024 another fascinating school contact took place between the Gymnasium Meschede and the International Space Station (ISS). The contact, made via amateur radio, could be heard loud and clear in East Frisia. Right on time at 10:08 CEST, listeners could hear the voice of astronaut Sunita Williams, who is currently on board…
I took the plunge and got myself the T-Deck, a device that had caught my interest for quite a while. After a long search I finally found the matching T-Deck UI and successfully installed the firmware on my T-Deck. It is an alpha version that the developer has not yet released for regular use, which…
Ingo DO6ID has modified this case for the Heltec Wireless Paper so that you can use the supplied acrylic glass panels. You will also need 4x M2 heat-set threaded inserts; the supplied M2 screws can be used.4x M3x20mm countersunk screws4x M3 nuts If you want the case to stand upright like this, you need an…
Operating modes for nodes in the mesh network To ensure stable communication in the mesh network, it is important that all node operators stick to certain ground rules. In particular, every node should run in the right mode to keep traffic on the frequency as low as possible. Here is an overview of the most…